Thursday, January 8, 2015

DIY Vanilla

Pure homemade vanilla extract smells heavenly...
adds intense flavour to baked goods...
and makes a fun little gift from the kitchen.


And who knew it could be so easy to make?
All you need is vodka and vanilla beans.

Once your extract is finished steeping...
bottle it and use it to your heart's content.

Or share it with your friends.

I posted complete instructions right here...

Saturday, May 17, 2014

Concrete Garden Bowls

I'm still enjoying the concrete garden bowls amongst the of art that I made following instructions in a farming publication of some sort almost a decade ago. They were quite fun to I thought I would share the instructions over here.

The concept is simple...and the only mold required is a pile of sand. The bowls can be left natural concrete colour and painted...or a colouring agent can be added to the concrete when mixing. Rhubarb leaves work great...but any large leaves with prominent veins will do. Here's the recipe...
  • 1 bag quickset concrete mix
  • weldbond glue
  • plastic kitchen wrap
  • large bucket
  • water
  • rubber gloves
  • large leaf...with no holes or rips
  • colouring agent  (mine came from the concrete shop...but you can use orange chalkline chalk to produce a terracotta colour)
Make a mound of damp sand on your work area...the higher the mound the deeper the bowl. Cover your mound completely with plastic wrap, overlapping pieces. Place the leaf (vein side up) over the wrap-covered mound. The wrap must extend out from the edges of the leaf, as this keeps the concrete from coming into contact with the sand. You have created a mold.

Pour about 4" of water into the bucket...add about 1/4 cup of weldbond glue (eyeball measurements are good enough!), and mix well. Wearing rubber gloves, add quickset concrete mix (and colourant powder, if desired) until you can make a ball of the concrete mixture that holds it's shape. You want the concrete to stay on your leaf and not slide off. Take a little of the mix and place it on the top of the leaf, then begin working the blob of mix toward the edge of the leaf, but not quite to the edge. Put it over all the about 1 1/2 inch thickness in centre. Leave a bit of leaf all around the edge so that the veins will run to the very edge of the bowl. If you run out of concrete, don't panic...just mix more!

Cover your finished bowl with painter's plastic and allow to set for at least 2 days , before gently removing from the mold. If you cannot remove all the veins without damaging the bowl, just leave them & eventually they will shrink and brush out easily. The leaves fully cure in about thirty days. Then you can seal them with a concrete sealer.

Each leaf is a two are the same. On the ones I made as gifts...I wrote my initials and the date on the backside of the leaf while it was still soft.

We set up a 'factory' outside (you can do that on the farm), and made umpteen at one time. That's so much easier than mucking around with concrete many times. 

Have fun!

Saturday, March 15, 2014

Sharpie Doodle Onesies

I have had a package of four Carter's white baby onesies in the cupboard for several years...waiting for me to embroider some designs on the front.  The babies came and went (out grew the onesies)...and the package was still un-opened.  Some weeks ago my friend welcomed a new grandchild into the family...her first granddaughter.  Since I knew the embroidery was not going to be happening any time soon...I decided to go with 'sharpie pen embroidery' instead.  In no time...the wee undershirts were personalized for Baby Ivy and ready to gift. Each onesie had a design on the well as a small leaf-art on the back-side.  As to how well they will withstand laundering...I'll keep you posted!

  • Baby Onesies
  • Sharpie Pens (permanent markers)
  • Freezer Paper
  1. Cut a piece  of freezer paper larger than the area you plan to draw on.
  2. Iron it to the inside of the onesie to stiffen the fabric and prevent the marker from bleeding through.
  3. Trace an image using a light box (or by taping project to a window with the design underneath).  Outline with a pencil if desired...then go over lines with the marker. 
  4. Heat set for 30 minutes in clothes dryer on highest setting. 
 Have fun!

Monday, February 3, 2014

Sharpie Art Plate for Valentine's Day

With Valentine's Day just around the corner...
my little helper and I got crafty on the weekend...
and worked some Sharpie magic on dollar store dinner plates.
We had fun!

Simple black on white turned out well...
created by colouring in the holes of a heart-shaped template.

If the plate is to be a gift...
put the name of the recipient and the date on the back.

My granddaughter got quite creative on plates she made for her parents.
They went home with her...
before I took a photo of the completed projects.

Once the plates were done to our satisfaction...
they were baked at 350°F for 30 minutes to set the ink.

They should now withstand hand-washing without fading.
Dishwashers are not recommended for sharpie-decor dishes.

You still have time.
Pick up some white dishes and have fun!

Note: Rubbing alcohol on cotton swabs cleans up any mistakes as you go along.